|
|
| edge bandings - OPTIMAL WORKING CONDITIONS |
 |
-
It is very important to work with a good quality edge bander. The operator shall be skilled and very well experienced with the setting of the machine.
-
Please do not remove the protective film during processing. Take it off only after assembling the furniture piece. Do not use aggressive/abrasive substances to clean the surface of our edge bandings after removing the protection film
-
Please find below some suggestions as to the stocking/processing conditions:
-
In case of cold stocking retrieve the edge bandings 12 hours at least before processing until they reach the suggested stocking temperature
-
emperature of the working shop: 15-25 degrees C°
-
HOT MELT temperature: 200-210 degrees C°
-
HOT MELT type HENKEL DORUS KS 351
-
edge bander: BIESSE STREAM B1 and similar
-
Application speed: 18-25 meters per minute
-
Cutting blades: 6 diamond cutters
-
Finishing blade, material: VIDIAM thickness 3 mm
|
|
|
|
|
